What the survey finds
Thermal imaging shows modules, strings and connections that are running hotter than their neighbors, which is how most production-robbing defects first appear. A full-plant survey screens every module instead of a sample.
| Finding class | What it usually means | Typical action |
|---|---|---|
| String or block not producing | Open circuit, tripped protection or inverter input fault | Same-day notice to O&M |
| Hot cell or hot spot | Cell cracking, shading or soiling damage | Inspect; replace module if confirmed |
| Bypass diode activation | Substring short or failed diode | Replace module or junction box |
| Hot connector or combiner | Loose or corroded connection | Torque or replace before it fails |
| Soiling and vegetation patterns | Uneven cleaning or encroaching growth | Adjust cleaning and vegetation plans |
How we fly it
- Scope. We confirm the plant layout, asset naming, access and safety rules, and pick a window in the spring and summer irradiance season.
- Capture. Radiometric thermal and RGB imagery with RTK positioning, flown only when plane-of-array irradiance is at least 600 W/m², with conditions logged throughout.
- Detect and review. Software screens every module against its peers; an analyst confirms, measures and classes every flag.
- Deliver. A signed report and the full data package. Rows lost to cloud shadow are re-flown.
What you receive
- Signed report (PDF): summary, findings, severity, recommended actions and sign-off
- Findings register (CSV, XLSX): every finding with coordinates, asset IDs, severity and status
- GIS layers (GeoJSON, KML) and georeferenced orthomosaics (GeoTIFF)
- Image pairs: a thermal and a visual image for each finding
- Capture log: flight times, irradiance and weather, for the record
Findings are matched to your asset IDs, so the register can be loaded into your maintenance system. Estimated energy and revenue at risk are shown for each finding class.
Who it's for
- Owners and independent power producers who want a consistent annual condition baseline across sites
- O&M providers who need a located, prioritized work list and repair verification flights
- Buyers, lenders and independent engineers during an acquisition or refinancing: see the Transaction Condition Survey
Questions
When can a solar plant be flown?
The thermography standard calls for at least 600 W/m² of irradiance on the modules, so surveys run on clear days from spring through early fall, near midday. We schedule around your O&M calendar.
Do you sell repairs or modules?
No. We inspect and report only, so findings are never shaped to create work.
Can you fly plants with single-axis trackers?
Yes. Flight plans and capture angles are set for the tracker position during the window.